Aumente a potência do seu automóvel

18.5 mm Intake manifold swirl flap removal kit for Opel, Vauxhall, Fiat, Alfa Romeo, Saab 1.9 JTD CDTI TiD engines
Ref. TAC18

51,66 €

-
+

Inlet manifold swirl flap removal kit for JTDM / CDTI / TiD engines.
Diameter of the bushes: 18.5/8.2 mm
The kit consists of:
- 5 aluminium bushes (4 big bushes and 1 small bushes) with high quality Viton O-Ring, resistant to engine oils and high and low temperature;
- the adhesive to secure the connection.


Removal kit is suitable for:
ALFA ROMEO 1.9 JTD Multijet
16V 110kW / 150HP (939A200)
 
FIAT 1.9 JTD Multijet
16V 110kW / 150HP (939A200)
 
OPEL / VAUXHALL 1.9 CDTI
16V 88kW / 120HP (Z19DTJ)
 
OPEL / VAUXHALL 1.9 CDTI
16V 110kW / 150HP (Z19DTH)
 
CADILLAC 1.9 TiD
16V 110kW / 150HP (Z19DTH)
 
SAAB 1.9 TiD
16V 110kW / 150HP (Z19DTH)
This kit allows you to re-use the original inlet/induction manifold with the swirl flaps removed, meaning there are no further issues with the manifold.
This kit is designed specifically to work with the latest design of Pierburg inlet manifold, which is part number: 55210201 / 2.03462.03 / 2.65703.07 / 55210202
WARNING!
1. When fitting this kit, you must leave the flap actuation motor and connected electrically but disconnect the lever arm.
2. If you have an earlier version of the manifold, this kit can't be used. The swirl flap holes in earlier versions are smaller in diameter.
Ao usar este website, está a aceitar a utilização de cookies para análise, conteúdo personalizado e apresentação de anúncios.